refill 1pd *0

john28200 · Post by **john28200** » Wed Apr 27, 2011 11:32 pm

ok so i got a problem just got a fruit "Gettin Ziggy With It" with the refill key barrel removed i filled up the hopper now i get a message with ( refill 1pd *0 ) anyone know how i can bypass this

thanks in advance

Captain.Tattybojangles · Wed Apr 27, 2011 11:45 pm

That's not a problem at all
Refill 1pd*0 basically is the machine telling you it's full, as it needs 0 pounds to be refilled. Say you now went on and won £50 from it then it would say Refill 1pd*50, because you'd need to put the 50 pounds back for the hopper to be filled again.
So if it's saying Refill 1pd*0 and you've just filled the hopper, there's nothing wrong at all

ms1303 · Post by **ms1303** » Wed Apr 27, 2011 11:56 pm

do you mean that this is constantly displayed so you cant play the machine? probably gonna need 2 attatch a new lock to the refill as the machine must think the keys been turned

john28200 · Post by **john28200** » Thu Apr 28, 2011 9:44 am

cant play the machine as its on refill 1pd*0 constant is there any way round this

gambogaz1 · Post by **gambogaz1** » Thu Apr 28, 2011 9:46 am

Your refill switch is stuck at refill position, you need get a new barrel so you can switch it back to normal mode.

john28200 · Post by **john28200** » Thu Apr 28, 2011 9:47 am

gambogaz1 wrote:Your refill switch is stuck at refill position, you need get a new barrel so you can switch it back to normal mode.

yeah i think u got it spot on mate
r they easy to fit ? is there no other way round this ?

uber-pro · Post by **uber-pro** » Thu Apr 28, 2011 11:47 am

Surely you can just hotwire it??

Isn't the refill barrel just an on off switch? Twise the wires together, or disconnect them, assuming there are any. If not see if you can find the socket on the motherboard and stick half a paperclip in it?!

john28200 · Post by **john28200** » Thu Apr 28, 2011 1:31 pm

uber-pro wrote:Surely you can just hotwire it??

Isn't the refill barrel just an on off switch? Twise the wires together, or disconnect them, assuming there are any. If not see if you can find the socket on the motherboard and stick half a paperclip in it?!

if i was to buy an on off switch would that work ?

wildcat · Post by **wildcat** » Thu Apr 28, 2011 2:36 pm

yup it should work fine, but a new barrel is piss easy to fit, just pop it in the hole and screw the thread on it, then just connect the wire connectors to the tabs on the barrel, if the machine still stays in refill mode, just swap the wires over, job done! You can get one off ebay for a couple of quid.

Remember to turn the machine off tho cos you could get a shock or damage your machine!