help me plzzzzz

Got a broken machine? Need help? Ask here!
Locked
bobby_77
Junior Member
Posts: 1
Joined: Sat Nov 24, 2007 5:08 pm

help me plzzzzz

Post by bobby_77 »

hiya mate,
my cash gordon maygay machine if left for a while will work sometimes when i switch it on then it freezes,i got the boards tested and changed the one at the top with the input/output on it all the lights worked then but i was told the psu board had low resistence faults on the chips so i purchased a new power supply from euro coin and plugged it in and away it went for approx 30-40mins then froze on my old psu the 12v light didnt come on now on the new psu all the lights come on apart from the sync light but if you wiggle the lead feeding the psu about the sync light flickers then all the lights go off and come back on except the sync one also all the boards in the machine have green lights on them except the board that looks as though it is feeding the reel lights that seems to have no power to it i dont know if the sync light and the board have anything in common it seems to be if you leave it for a day or 2 it will work for a bit then it freezes again. Can anybody help?
pearce_jj
Junior Member
Posts: 7
Joined: Tue Dec 11, 2007 8:42 am
Location: Sittingbourne, Kent, UK

Post by pearce_jj »

can you not send back the new PSU? 'wiggling' suggests faulty connections.
Locked