Got a broken machine? Need help? Ask here!
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Fri Aug 21, 2015 7:22 am
Hi all. What note acceptor do I need to fit barcrest starwars £70 machine. Thanks.
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Fri Aug 21, 2015 9:03 pm
either a jcm (c-c talk version) or nv8 / nv10 depending on which wiring you have
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Fri Oct 16, 2015 5:51 pm
I have just got an NV8. Fitted it all in but where do I plug it in ? The 3 wires are all black and the plug looks way to big to fit anywhere. Pics to follow.
Attachments
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Fri Oct 16, 2015 6:13 pm
picutre 1 looks like the wiring for a JCM note accpetor, which means you would need a JCM acceptor..
thats why i mentioned the wiring in post 2
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Fri Oct 16, 2015 6:18 pm
im a bit thick.
pic one is the big plug from the nv8 and pic 2 is whats in cabinet. the label in the cabinet says nv8 or nv10 should fit.
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Fri Oct 16, 2015 6:18 pm
im a bit thick.
pic one is the big plug from the nv8 and pic 2 is whats in cabinet. the label in the cabinet says nv8 or nv10 should fit.
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Fri Oct 16, 2015 6:48 pm
ah i c, your missing a part of the wiring then.
the loom you have, fits a note acceptor to a barcrest mpu 6 machine, you need a loom for a mpu5
The attachment barcrest-horizon-note-acceptor-loom-176-p[ekm]300x270[ekm].jpg is no longer available
i think thats what u need
Attachments
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Fri Oct 16, 2015 6:54 pm
would that be ebay then ?
unless anybody has one on this site ?
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Fri Oct 16, 2015 6:54 pm
would that be ebay then ?
unless anybody has one on this site ?
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Fri Oct 16, 2015 6:55 pm
search for a barcrest horizon cabinet nv 8 or 10 note acceptor loom
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Mon Oct 19, 2015 1:24 pm
None to be found anywhere. E service wanted £67 to make a lead up. I can get a 4 pin molex plug. Just need help with the 4 wires as they are all black I think.
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Tue Oct 20, 2015 10:15 am
Anybody in the midlands that could help me with this problem I would be grateful. Thanks.
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Thu Oct 22, 2015 4:53 pm
New atx plug arrived today. So there are 4 wires to connect. Pins 1, 3, 15 and 16. Pins 1 and 3 are connected together on other end of plug. Pin 15 is +vin 12 volt and pin 16 is 0volt. But they are all black. Could do with wiring diagram if anybody can help. Thanks
plazmapete
Senior Member
Posts: 100 Joined: Thu Jul 15, 2010 8:29 pm
Location: staffordshire
Post
by plazmapete » Thu Oct 22, 2015 5:02 pm
Also will I need to set any dip switches on the mpu5 ???