Magic seven pusher
Magic seven pusher
Good morning guys I'm a new be to your forum would like to say hello to all you guys and girls....... Also would anyone be able to assist me I have a magic 7 pusher 10p harry levey machine we have problems with this machine it won't take coins from the lower slots and drop them in to the top of the machine any help would be fantasic happy gaming to you all............
-
- Senior Member
- Posts: 176
- Joined: Sat Oct 28, 2006 11:40 pm
- Location: South Shields,Tyne and Wear
It looks like both hoppers are jammed,you should hear the call attendant voice,and there are two lamps on the front of the cabinet and they could also be on,if you open the door just below the chutes there is a switch to test the hoppers and if they still don't work you will have to take the hoppers out and strip them down to find the jammed coins,if they have jammed and overlapped each other in the escalator,you will have to strip that down as well because it buckles the guides
Morning lee thanks for help I can fill the hoppers and using the hopper dump I can empty them through the machine. The insert coin slots on the lower part of the machine should a ten pence drop in the top when one is inserted .... Cheers Lawrencelee wrote:It looks like both hoppers are jammed,you should hear the call attendant voice,and there are two lamps on the front of the cabinet and they could also be on,if you open the door just below the chutes there is a switch to test the hoppers and if they still don't work you will have to take the hoppers out and strip them down to find the jammed coins,if they have jammed and overlapped each other in the escalator,you will have to strip that down as well because it buckles the guides
Hi not sure if its detecting coins as when I place coins in lower slot the flap does not do anything, its only when £1 coins are added you get credits for the value of coins added Did try cleaning sensors on coin slots but no change Also is there anyway of finding out what the values mean in the step menu thanks Lawrence
here is a manual for an elvis pusher from harry levy, it runs on the same main board so pretty sure the settings are the same
http://www.crownleisure.co.uk/Documents ... 0email.pdf
http://www.crownleisure.co.uk/Documents ... 0email.pdf