I've been using my Jiggin in the Rigging machine all fine, except on occasion it jams when trying to payout on 20p. I know the coin mech hasn't been used for years.
What's the best way to clean it out/service this part of the machine?
20p hopper jam - how to clean
-
Captain.Tattybojangles
- Senior Member
- Posts: 1159
- Joined: Thu Sep 17, 2009 6:04 pm
- Location: Today, Hull. Tomorrow...Still Hull...
Best way to clean coin mech I think is a little pipe cleaner or something with water? Either way there's no need for any other liquids other than water. If it's definitely in need of service then it won't be accepting coins and that. But if the 20p hopper is faulty, then leave the coin mech alone. If it aint broke don't fix it.
Don't know much about hopper maintenence, except if it's got a bent coin in it, where you have to take it apart a bit. So just make sure you aint got bent coins for a start
Don't know much about hopper maintenence, except if it's got a bent coin in it, where you have to take it apart a bit. So just make sure you aint got bent coins for a start
kill the sarcasm fuckhead, your posting in the wrong section!jacobsdad wrote:Another non answer from you. Helpful.silent g wrote:theres a technical area at the bottom for machine problems you know!
no one looking in the barcrest section cares about your 20 year old machine.
if you pu tit in the right area you might get better answers.
however, if you want a arguement keep giving me your attitude!
condoms... ribbed for her pleasure! turn it inside out and its ribbed for my pleasure 
-
streakseims
- Senior Member
- Posts: 968
- Joined: Tue Aug 18, 2009 3:48 pm
- Location: United kingdom
Im Sure this machine dont Pay 10ps it pays 20ps have you put 20p pieces into it? if it pays 10s you will know when you put 1 in does it sit in the top of the machine or does it fall straight down to the bottom.
Silent G is tryin to help m8 there is a Tech area on this board if you post in there people who go in there are looking to help where in this section people may just skip your post as they want to read about fruits not how to repair one.
Is it on Hoppers? or is it on tubes? if its hopper take it out and they wil be some catches on the casing where the coins fall in have a look down and you will see a wheel that should spin with holes in for it to meter out the coins. you may find a 1p has been put in there and jammed it up you can move some backwards manually.
But if you have no 20ps in the machine id say it needs them to pay out.
Silent G is tryin to help m8 there is a Tech area on this board if you post in there people who go in there are looking to help where in this section people may just skip your post as they want to read about fruits not how to repair one.
Is it on Hoppers? or is it on tubes? if its hopper take it out and they wil be some catches on the casing where the coins fall in have a look down and you will see a wheel that should spin with holes in for it to meter out the coins. you may find a 1p has been put in there and jammed it up you can move some backwards manually.
But if you have no 20ps in the machine id say it needs them to pay out.
Thanks. I'll give that a go.streakseims wrote:Im Sure this machine dont Pay 10ps it pays 20ps have you put 20p pieces into it? if it pays 10s you will know when you put 1 in does it sit in the top of the machine or does it fall straight down to the bottom.
Silent G is tryin to help m8 there is a Tech area on this board if you post in there people who go in there are looking to help where in this section people may just skip your post as they want to read about fruits not how to repair one.
Is it on Hoppers? or is it on tubes? if its hopper take it out and they wil be some catches on the casing where the coins fall in have a look down and you will see a wheel that should spin with holes in for it to meter out the coins. you may find a 1p has been put in there and jammed it up you can move some backwards manually.
But if you have no 20ps in the machine id say it needs them to pay out.
Quite the little keyboard warrior, aren't you. What's the matter - daddy not giving it to you as much as you might like?silent g wrote:kill the sarcasm fuckhead, your posting in the wrong section!jacobsdad wrote:Another non answer from you. Helpful.silent g wrote:theres a technical area at the bottom for machine problems you know!
no one looking in the barcrest section cares about your 20 year old machine.
if you pu tit in the right area you might get better answers.
however, if you want a arguement keep giving me your attitude!
where the fuck are you from you fucking twat, anyone on here will tell you that im far from little you nobgobbler and im quite the oppersite from a keyboard warrior!jacobsdad wrote:
Quite the little keyboard warrior, aren't you. What's the matter - daddy not giving it to you as much as you might like?
come to london and fight like a man or shut the fuck up fool!
condoms... ribbed for her pleasure! turn it inside out and its ribbed for my pleasure
Loser!silent g wrote:where the fuck are you from you fucking twat, anyone on here will tell you that im far from little you nobgobbler and im quite the oppersite from a keyboard warrior!jacobsdad wrote:
Quite the little keyboard warrior, aren't you. What's the matter - daddy not giving it to you as much as you might like?
come to london and fight like a man or shut the fuck up fool!
-
pokerkingqueen
- Senior Member
- Posts: 274
- Joined: Sat Aug 09, 2008 11:44 pm
- Location: South West London
.............ahemmmmmmmmmmmmmmm
it appears we have 2 keyboard warriors