jpm superbreakout fault

john_disco · Post by **john_disco** » Wed Jun 02, 2010 12:01 pm

Hi i'm new to this forum
i have a jpm superbreakout with a fault which comes up with error 91 00 which is a general processor error
i think the error accurd when the ps unit went belly up and after a replacement ps unit i had the error
a borrowed impact 1 motherboard showed it was not the motherboard but the cpu and memory card at fault, ive been told this is the one that usualy goes wrong, the card pcb no 602166 B as per photo
the condition of the card and battery are as new so no batt leakage
i do have spare ram which can be put in if need be
what would i have to do in order to find out what i have to replace on the board to get it to run
any help would be appriciated to get the machine up n running again

cheers john

john_disco · Post by **john_disco** » Fri Jun 04, 2010 8:14 pm

looks like i'll have an oversize doorstop for a while

trayhop123 · Post by **trayhop123** » Fri Jun 04, 2010 10:25 pm

try putting it in the right section if you want answers m8

john_disco · Post by **john_disco** » Sat Jun 05, 2010 12:19 am

trayhop123 wrote:try putting it in the right section if you want answers m8

thanks was'nt quite sure which part to put it in

john_disco · Post by **john_disco** » Fri Jun 11, 2010 9:40 pm

anybody help??

lurch 13 · Post by **lurch 13** » Thu Nov 11, 2010 10:26 am

hi did you solve your problem cos my card is no good too

john_disco · Post by **john_disco** » Thu Nov 11, 2010 12:45 pm

lurch 13 wrote:hi did you solve your problem cos my card is no good too

no sorry i did'nt tried a few cards and motherboards but to no effect still had the error code, gave up on it shame realy was a minter, gone now though
hope you have more luck than i did