Page 1 of 1
Club Cops And Robbers Gold £250 Jackpot.
Posted: Thu Oct 03, 2013 9:53 pm
by ducatihugh
Posted: Fri Oct 04, 2013 12:12 am
by streakseims
Fuse in power unit in bottom.of machine
Posted: Fri Oct 18, 2013 6:15 pm
by ducatihugh
Thanks will check that out,its a white opaque colour so cant tell if its blown or not.

Posted: Thu Nov 07, 2013 9:41 pm
by ducatihugh
Hi mate,tried changing the fuse and no difference at all,I assume you mean the fuse in the power pack??? Thanks..
Posted: Thu Nov 07, 2013 10:43 pm
by streakseims
No loose plugs on main board?
Posted: Sat Nov 09, 2013 2:16 pm
by doingthem
Done
Posted: Sat Nov 09, 2013 4:08 pm
by Lilly Satou
M does not just stand for "My, my" but it also stands for "MUX board."
If the lamps cause you problems, it might be useful to check the MUX board, if this machine has one.
Posted: Wed Nov 13, 2013 5:41 pm
by ducatihugh
Hi I've checked all the blocks on the main board to ensure none are loose and its made no difference,any other possibilities??
Posted: Wed Nov 13, 2013 8:11 pm
by buzzer
could be a faulty power supply.
bellfruit power supplies are notorious for resetting and lamp failures on club machines.
Posted: Thu Nov 14, 2013 8:15 pm
by ducatihugh
Oh bugger sounds expensive,can't understand why everything else still works apart from the display bulbs...
Posted: Thu Nov 14, 2013 10:57 pm
by buzzer
because the bulbs run off +44v/+48 power supply and nothing else does.
these power supplys are prone to over heating, which in turn causes dry joints.
you could pop the lid off and check for dry joints, also check capacitors havn't popped.
also check the connectors on power supply for signs of heating/damage.
i have seen the molex plugs scorched before and wires damaged