Discuss Barcrest Fruit Machines Here..
streakseims
Senior Member
Posts: 968 Joined: Tue Aug 18, 2009 3:48 pm
Location: United kingdom
Post
by streakseims » Fri Oct 04, 2013 12:12 am
Fuse in power unit in bottom.of machine
6 million ways to pie....choose 1
ducatihugh
Junior Member
Posts: 16 Joined: Thu Oct 03, 2013 9:24 pm
Post
by ducatihugh » Fri Oct 18, 2013 6:15 pm
Thanks will check that out,its a white opaque colour so cant tell if its blown or not.
ducatihugh
Junior Member
Posts: 16 Joined: Thu Oct 03, 2013 9:24 pm
Post
by ducatihugh » Thu Nov 07, 2013 9:41 pm
Hi mate,tried changing the fuse and no difference at all,I assume you mean the fuse in the power pack??? Thanks..
streakseims
Senior Member
Posts: 968 Joined: Tue Aug 18, 2009 3:48 pm
Location: United kingdom
Post
by streakseims » Thu Nov 07, 2013 10:43 pm
No loose plugs on main board?
6 million ways to pie....choose 1
Lilly Satou
Senior Member
Posts: 111 Joined: Mon Jul 29, 2013 2:59 am
Location: 大和市、神奈川、日本
Post
by Lilly Satou » Sat Nov 09, 2013 4:08 pm
M does not just stand for "My, my" but it also stands for "MUX board."
If the lamps cause you problems, it might be useful to check the MUX board, if this machine has one.
My, my!
ducatihugh
Junior Member
Posts: 16 Joined: Thu Oct 03, 2013 9:24 pm
Post
by ducatihugh » Wed Nov 13, 2013 5:41 pm
Hi I've checked all the blocks on the main board to ensure none are loose and its made no difference,any other possibilities??
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Wed Nov 13, 2013 8:11 pm
could be a faulty power supply.
bellfruit power supplies are notorious for resetting and lamp failures on club machines.
ducatihugh
Junior Member
Posts: 16 Joined: Thu Oct 03, 2013 9:24 pm
Post
by ducatihugh » Thu Nov 14, 2013 8:15 pm
Oh bugger sounds expensive,can't understand why everything else still works apart from the display bulbs...
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Thu Nov 14, 2013 10:57 pm
because the bulbs run off +44v/+48 power supply and nothing else does.
these power supplys are prone to over heating, which in turn causes dry joints.
you could pop the lid off and check for dry joints, also check capacitors havn't popped.
also check the connectors on power supply for signs of heating/damage.
i have seen the molex plugs scorched before and wires damaged