Page 1 of 1
need help with error codes
Posted: Tue Jul 22, 2014 11:20 pm
by sparko89
hi there im new to this i have a pink panther 35 pound jackpot machine but i have a error on the lcd bit it says pay err 17 i dnt have a clue what that means can some one help
Posted: Wed Jul 23, 2014 2:11 pm
by buzzer
error 17 denotes a hopper problem,
either:
1: hopper opto blocked or dirty (clean or remove blockage)
2: faulty hopper (replace hopper)
3: hopper disconnected (make sure every thing is plugged in, the hopper tray will be removable so will be a connector or plug)
4: faulty mother board (unusual, but not unheard of)
Posted: Tue Jul 29, 2014 4:09 am
by sparko89
hi there i have looked to see if the hopper is blocked and dirty but there is no sign of that im not even sure if theres power going to it tbh
Posted: Fri Jan 30, 2015 8:08 pm
by DarylJG
Check the hopper can spin correctly and easily (you can move it around with your fingers and a little pressure), but otherwise. This error is mainly encountered where I work when it's a paring problem.
All you do, is turn off the mains for the machine. Unplug the hopper & hold it upside down for a few seconds, re-connect all the leads and power back on. This error should be resolved