Page 1 of 1
Astra Machines
Posted: Wed Jan 28, 2009 12:03 am
by dazzer
Hi what is the best way to change the start button bulb as Ive notice that there is a metal plate covering over the button then u have the coin mech in front plus what is the name of the part that sits under the mech that diverts the money
Posted: Wed Jan 28, 2009 12:14 am
by stewy
Not had much to do with Astra's (only my car haha). I'm sure when I done one I removed the metal plate that you are talking about, sure it's just a case of whip two screws out and you're into it???
Re: Astra Machines
Posted: Wed Jan 28, 2009 12:11 pm
by aaamusements.co.uk
dazzer wrote:what is the name of the part that sits under the mech that diverts the money
The sorter?
Posted: Thu Jan 29, 2009 11:47 pm
by stewy
i'd be inclined to agree
mech
Posted: Fri Feb 06, 2009 6:45 pm
by brian
sorter? lol seperater
Posted: Fri Feb 06, 2009 7:09 pm
by aaamusements.co.uk
Potayto, Potahto.
part
Posted: Sat Feb 07, 2009 6:26 pm
by brian
brick-----breeze block 2 diff things on a mech lol
Posted: Sat Feb 07, 2009 6:33 pm
by aaamusements.co.uk
I've never seen either building material attached to a mech, fortunately!
Posted: Sat Feb 07, 2009 7:55 pm
by lee
I will come and do it for you
Re: mech
Posted: Sun Feb 08, 2009 9:54 pm
by aaamusements.co.uk
brian wrote:sorter? lol seperater
Do you know Brian I was about ready to agree with you and say that I have no idea where I got "sorter" from and that I must have been having a "blond moment"... then today while I was stripping an MPU5 cab I read the instructions on the mech bracket - which referred to the "sorter".
So, in summation; Lol.
sorter
Posted: Sat Feb 21, 2009 10:11 pm
by brian
lol----------- so you were right after all -clever .g....t-lol
Re: sorter
Posted: Sun Feb 22, 2009 12:27 am
by aaamusements.co.uk
brian wrote:lol----------- so you were right after all -clever .g....t-lol
Nah not really - they are universally known as separators as you say - I was just having one of those moments!
ops:
Posted: Mon May 11, 2009 11:09 pm
by meccaman
Best way to do this is undo the 4 or 5 screws holding the belly glass frame on and then once off you have gained access to behind the mech. Alternatively if careful pop off the lens cap with a flat head screwdriver and use long nose plier to pull out and replace bulb. Have done that a few times with sucess! lol