Page 1 of 1
6.1 Note aceptor error
Posted: Sat Jan 17, 2009 10:16 pm
by adrian
Hi i have a epoc hurricain that keeps saying 6.1 note aceptor error but it is not fitted to this machine
any idears many thanks
Posted: Sat Jan 17, 2009 11:03 pm
by 6502
if the option switch's are telling the program to expect a note acceptor, it could alarm if no note acceptor is fitted,
Check what option switches are on and turn each one of one by one to see if it cures the problem (be sure to note then down 1st)
Posted: Sun Jan 18, 2009 12:41 am
by aaamusements.co.uk
I looked in the manual for the dil switch setting for a note acceptor, but unfortunately the manual is for the pre-Elegance Epoch cab!
Can't recall the switch offhand either.
Posted: Sun Jan 18, 2009 3:29 pm
by stewy
That's all it is. There is a dil switch set to 'tell the machine' that there is a note acceptor fitted. Get hold of a manual and flick the switch, job done...
Posted: Sun Jan 18, 2009 4:51 pm
by starleisure
for some reason dil switch 4 or 7 ring a bell.
just look to see if 4 or 7 is set to the on position and if so just slide it back as most dil switches will be set to off.
Posted: Sun Jan 18, 2009 7:06 pm
by aaamusements.co.uk
Try:
2-6
8-10
13
Posted: Mon Jan 19, 2009 10:20 am
by 6502
If it's any help...
I know later Global epoch machines used switch 10 for most note acceptors and 11 for JCM acceptors
and switch 5 to stop it locking out when hopper < £125
Posted: Tue Jan 20, 2009 1:46 am
by stewy
Cant offer any real solution but just looked in an old notebook with dil settings and i'd go for switch 9 or 10. This is an old book that I have written in years ago and tbh, can't even remember what machine it refers to, only that it is a global.
Try moving switch 9 or 10 to the opposite position, should be off, i guess.