Page 1 of 1
1.6 mech note error
Posted: Tue Mar 18, 2008 4:40 pm
by mitchell.comer
as previous posts my machine is faulty sometimes turning on and sometimes not, this is now all i get when i turn machine on i have left for around 2mins and also tried turning refill to clear alarm but nothing?
any ideas?
maygay homers meltdown
cheers
note mech
Posted: Tue Mar 18, 2008 5:39 pm
by brian
are you sure there are no notes stuck in the mech
note mech
Posted: Tue Mar 18, 2008 5:40 pm
by brian
also if you have manual for said machine---why dont you use dill switches to tell machine it has not got a note accepter----bingo----
fault
Posted: Tue Mar 18, 2008 5:57 pm
by mitchell.comer
machine has no manual, i also not very good with machines hence the help required
but it doesnt have a note acceptor it think it does.
cheers
notes
Posted: Tue Mar 18, 2008 5:59 pm
by brian
ok then dill switch is in wrong position---try one at a time
fauly
Posted: Tue Mar 18, 2008 6:03 pm
by mitchell.comer
what do they look like
i know i should probably know but i have had this machine since new and never had 1 problem.
i have tried contacting fruit machine companies they seem to think psu but i can't understand why this alarm has never happened before.
cheers brian
dill
Posted: Tue Mar 18, 2008 6:10 pm
by brian
is there any chance someone had there hand in machine and knocked the main board? dill swithes are a row of little switches with on at top and off at bottom
fault
Posted: Tue Mar 18, 2008 6:22 pm
by mitchell.comer
this could have happened
i have had a quick look and the block closest has
option 1-8
1-8 switched to 'off'
the next block
option 1-16
has only number 6 switched to 'on'
does this help?
dills
Posted: Tue Mar 18, 2008 6:30 pm
by brian
ill scour the net for dill switch settings and get back to you on that one
fault
Posted: Tue Mar 18, 2008 6:40 pm
by mitchell.comer
wicked thanks for that
dil settings
Posted: Wed Mar 19, 2008 1:17 pm
by brian
hi
--------------------------------------------------------------------------------
switch bank 1-8
1.clear credits ony any reset(anti fraud) Off=yes On=no(3resets)
2-6 not used
7.payout bank after win Off=no On=yes
8 not used
switches 9-16
9,10 not used
11.Bank limit Off=high On=low
12.Credit limit Off=£10 On=£5
13.not used
14.Free credit (demo) Off=inhibit On=enable
15.Extended refill Off=inhibit On=enable
16.attract mode Off=normal On=Dim
fault
Posted: Wed Mar 19, 2008 4:57 pm
by mitchell.comer
this is really helpful and very good to know
i appreciate all this information you are sharing with me.
i have found an engineer who can service my machine for £35.00
cheers