Page 1 of 1
24V Sense Fault
Posted: Mon Nov 12, 2007 8:25 pm
by shortie72uk
Any ideas what this is guys, not got a clue.
Not had the coin payout problem for a bit.
Thanx Shortie
hey
Posted: Tue Nov 20, 2007 2:23 pm
by skeggy_engineer
Simple my friend, there is either no 24v supply coming from the power supply (chack with a multimeter) or you have a dry joint on the connection of the board.
Posted: Tue Nov 20, 2007 5:13 pm
by shortie72uk
Sorry im a noob at this, the multimeter i can check but whats a dry joint.
Thanx for the reply
.
Posted: Tue Nov 20, 2007 7:27 pm
by skeggy_engineer
Dry joint is where solder points have gone dry and are not making a connection properly, i would check the multimeter first on the 24v supply as i have a good feeling it is this
Posted: Tue Nov 20, 2007 7:30 pm
by shortie72uk
OK thanx
:)
Posted: Wed Nov 21, 2007 9:14 am
by PHOENIXLEISURE
Hi there just by what you have wrote Im assuming its a Barcrest -red-vivid machine ? if you don't solve the puzzle drop me a line.
Posted: Wed Nov 21, 2007 12:22 pm
by shortie72uk
Its a Barcrest club trailblazer
trailblazer
Posted: Thu Nov 22, 2007 3:46 pm
by Shakey
just open up the machine and see which LED's light up when the machine is powering up. Let me know and this will cut the fault finder down
Posted: Thu Nov 22, 2007 5:44 pm
by shortie72uk
All 4 that are together on the board at the back are on, the two to the left of them the right hand side one flashes the other dont light.
On the board thats behind the 4 reels, the one on the right flashes the left one nothing.
Hope this is understandable, if not will do a picture on paint and post it.
Thanx for all the help, cant test the machine till the weekend when my mate is here with the multimeter.
Shortie