Page 1 of 1
20P TOKEN WON'T GIVE ME ANY PLAYS
Posted: Sun Jul 22, 2007 12:10 pm
by braveheart124sh
HI, HOPE U CAN HELP, MY MACHINE TAKES THE TOKEN AND THEY GO IN THE TUBE BUT DOSEN'T GIVE ME ANY PLAYS ??, WHY NOT ??, SUPPOSED 2 GIVE 2 PLAYS PER TOKEN , HELP PLEASE

token
Posted: Sun Aug 05, 2007 6:24 pm
by brian
its knacked mate----lol----remove mech plug then re insert it---give it another go----if this doesnt work check all fuses on power supply---can only be these 2 things i would have thought
Posted: Mon Aug 06, 2007 8:33 pm
by eurobuskers
if _ts an older machine it could even be a mechanical problem with a "switch" !
im sure with token counters the only thing which is the real control of "is it a real token" is the cut out in the token, thus if it goes into the machine, it works. this was tha case with older machines with low payouts, there was a second control just to make sure it was metal or even worse, ive seen older mechs with counterbalanced weight systems to weigh it.
take out the mech and put a coin into it, watch its movement in the second case and see if it triggers a switch of some type.
If it is modern, put a meter on the pulse output to see if the mech can 'see' the coin pass.
in either type of mech, the coin passes as valid and is not kicked out, so there is a problem with the signal from the mech to the rest of the machin e
good luck mate
Posted: Tue Aug 07, 2007 9:18 pm
by brian
i would only have said it was a mechanical fault if the token was being rejected back to you---unless it has a routing problem
Posted: Tue Aug 07, 2007 9:54 pm
by eurobuskers
brian,
youre probably right, but it seems the token passes in the right direction, that is in the tube.
therefore, it is not being registered as having being accepted
mech
Posted: Tue Aug 07, 2007 9:57 pm
by brian
its one of those bugger ones aint it
Posted: Tue Aug 07, 2007 11:29 pm
by eurobuskers
lol
