Page 1 of 1
bellfruit big breakfast
Posted: Tue Dec 13, 2016 10:55 pm
by duomat
ok guys,i have had a quickplay and got it to work.i really could do with a manual,how do you alter the volume on this tech.also it has 2 speakers.one looks like an addition,where should it be mounted and is there one or 2 speakers.i need to replace some lamps and give it a good clean.im also going to replace the battery.any help wouldbe great.
Posted: Wed Dec 14, 2016 6:56 pm
by buzzer
i think there should be only one speaker positioned under the buttons if i remember correctly.
the volume is controlled using test mode
Posted: Fri Dec 16, 2016 6:41 pm
by duomat
buzzer wrote:i think there should be only one speaker positioned under the buttons if i remember correctly.
the volume is controlled using test mode
thanks buzzer.ive been in test mode and scrolled through lamp test,payout,display etc but no volume.would it be on the refill key.as for speaker i cant see anywhere it should go or any vents to let sound out.its mounted on right side under reel mech at mo and i had to move it so i could drop reel mech enough to remove them.
Posted: Fri Dec 16, 2016 8:32 pm
by buzzer
might be able to adjust through refil key.
try turning the refil key with one of the hold buttons down, try them one at a time.
i'm sure the speaker fits right under the buttons. are there clips on the side to drop the button panelout?
Posted: Fri Dec 16, 2016 11:47 pm
by duomat
the clips for button pannel are along the front.3 in all.one each side and one in middle.to access these you drop the reel section down.and to do that you simply pull 2 release pins.
Posted: Sat Dec 17, 2016 7:22 pm
by buzzer
right i had a look in a machine with the same cabinet today, the speaker fits infront to the payout tubes.
The attachment fritmachine.jpg is no longer available
from what i remember (bearing in mind that these machines were about 20 year ago), the speaker grill was an easy target for toolers and the speaker was moved.
this mihgt explain why the speaker is in a diffrent place now.
you should be able to adjust the volume though test or refil key..
hope this helps..
Posted: Sat Dec 17, 2016 7:22 pm
by buzzer
right i had a look in a machine with the same cabinet today, the speaker fits infront to the payout tubes.
[ATTACH=CONFIG]2113[/ATTACH]
from what i remember (bearing in mind that these machines were about 20 year ago), the speaker grill was an easy target for toolers and the speaker was moved.
this might explain why the speaker is in a diffrent place now.
you should be able to adjust the volume though test or refil key..
hope this helps..
speaker
Posted: Tue Dec 20, 2016 2:01 pm
by duomat
buzzer wrote:right i had a look in a machine with the same cabinet today, the speaker fits infront to the payout tubes.
[ATTACH=CONFIG]2113[/ATTACH]
from what i remember (bearing in mind that these machines were about 20 year ago), the speaker grill was an easy target for toolers and the speaker was moved.
this might explain why the speaker is in a diffrent place now.
you should be able to adjust the volume though test or refil key..
hope this helps..
Thanks buzzer.at least i know now.you can never know too much.have a good un.see you all next year.or speak anyway.the breakfast is now fully working and looking almost new.Happy new year :-)