rob da bank || Hopper issues i think

evertonian7uk · Post by **evertonian7uk** » Sun Apr 10, 2016 10:39 pm

hi guys, new member, new fruity user.

i have a rob da bank machine by barcrest - every time i put any money in it comes directly back out of the payout tray, i do not know what else to try, i have cleaned the hopper, the money part (opening the flap and cleaning it)

here is a video of what is happening, can anyone please assist?? i purchased the machine as a savings bank kind of, but it only plays in demo mode, i need help.

[video]http://www.lakenheathmilitarysales.com/ ... 221635.mp4[/video]

please if you can help let me know how to proceed.

evertonian7uk · Post by **evertonian7uk** » Sat Apr 23, 2016 11:38 am

can anyone give me an idea where to even start?? any youtube vids or anything?

buzzer · Post by **buzzer** » Sat Apr 23, 2016 4:54 pm

if its playing in demo then its probably in door open mode.

its not supposed to take money in this mode.

probably a door switch problem

buzzer · Post by **buzzer** » Sat Apr 23, 2016 4:59 pm

double post

evertonian7uk · Post by **evertonian7uk** » Sun Apr 24, 2016 1:12 pm

when all doors are locked it still wont take any money, i have cleaned the coin mechs and everything, there is power on the coin mech as the green LED is lit up but the money falls right through every time.

buzzer · Post by **buzzer** » Sun Apr 24, 2016 5:29 pm

does it still play on demo when the doors are locked?

evertonian7uk · Post by **evertonian7uk** » Wed Apr 27, 2016 1:26 pm

no, demo doesnt work at all when all doors are closed.

buzzer · Post by **buzzer** » Wed Apr 27, 2016 3:12 pm

i cant view your video (download failed)

do you know what type of mech is in the machine?

evertonian7uk · Post by **evertonian7uk** » Wed Apr 27, 2016 9:12 pm

do you guys know of any engineers in or around the PE16 area??

The attachment IMG_5571.jpg is no longer available

evertonian7uk · Post by **evertonian7uk** » Wed Apr 27, 2016 9:12 pm

do you guys know of any engineers in or around the PE16 area??

[ATTACH=CONFIG]2061[/ATTACH]

buzzer · Post by **buzzer** » Fri Apr 29, 2016 6:16 pm

possibly a dodgy mech.

i would swop it out for a cashflow mei 9500 or above. (it will fit right in, all you need to do is make sure switch 2 is on, rest off)

the led on this mech flashes red and green , this transfers into an error code which might help indicate what the problem is..