Note acceptor

plazmapete · Post by **plazmapete** » Fri Aug 21, 2015 7:22 am

Hi all. What note acceptor do I need to fit barcrest starwars £70 machine. Thanks.

buzzer · Post by **buzzer** » Fri Aug 21, 2015 9:03 pm

either a jcm (c-c talk version) or nv8 / nv10 depending on which wiring you have

plazmapete · Post by **plazmapete** » Fri Oct 16, 2015 5:51 pm

I have just got an NV8. Fitted it all in but where do I plug it in ? The 3 wires are all black and the plug looks way to big to fit anywhere. Pics to follow.

buzzer · Post by **buzzer** » Fri Oct 16, 2015 6:13 pm

picutre 1 looks like the wiring for a JCM note accpetor, which means you would need a JCM acceptor..

thats why i mentioned the wiring in post 2

plazmapete · Post by **plazmapete** » Fri Oct 16, 2015 6:18 pm

im a bit thick.
pic one is the big plug from the nv8 and pic 2 is whats in cabinet. the label in the cabinet says nv8 or nv10 should fit.

plazmapete · Post by **plazmapete** » Fri Oct 16, 2015 6:18 pm

im a bit thick.
pic one is the big plug from the nv8 and pic 2 is whats in cabinet. the label in the cabinet says nv8 or nv10 should fit.

buzzer · Post by **buzzer** » Fri Oct 16, 2015 6:48 pm

ah i c, your missing a part of the wiring then.

the loom you have, fits a note acceptor to a barcrest mpu 6 machine, you need a loom for a mpu5

http://www.fruitmachinespares.com/ekmps ... ekm%5D.jpg

buzzer · Post by **buzzer** » Fri Oct 16, 2015 6:48 pm

ah i c, your missing a part of the wiring then.

the loom you have, fits a note acceptor to a barcrest mpu 6 machine, you need a loom for a mpu5

The attachment barcrest-horizon-note-acceptor-loom-176-p[ekm]300x270[ekm].jpg is no longer available

i think thats what u need

plazmapete · Post by **plazmapete** » Fri Oct 16, 2015 6:54 pm

would that be ebay then ?
unless anybody has one on this site ?

plazmapete · Post by **plazmapete** » Fri Oct 16, 2015 6:54 pm

would that be ebay then ?
unless anybody has one on this site ?

buzzer · Post by **buzzer** » Fri Oct 16, 2015 6:55 pm

search for a barcrest horizon cabinet nv 8 or 10 note acceptor loom

plazmapete · Post by **plazmapete** » Mon Oct 19, 2015 1:24 pm

None to be found anywhere. E service wanted £67 to make a lead up. I can get a 4 pin molex plug. Just need help with the 4 wires as they are all black I think.

plazmapete · Post by **plazmapete** » Tue Oct 20, 2015 10:15 am

Anybody in the midlands that could help me with this problem I would be grateful. Thanks.

plazmapete · Post by **plazmapete** » Thu Oct 22, 2015 4:53 pm

New atx plug arrived today. So there are 4 wires to connect. Pins 1, 3, 15 and 16. Pins 1 and 3 are connected together on other end of plug. Pin 15 is +vin 12 volt and pin 16 is 0volt. But they are all black. Could do with wiring diagram if anybody can help. Thanks

plazmapete · Post by **plazmapete** » Thu Oct 22, 2015 5:02 pm

Also will I need to set any dip switches on the mpu5 ???