Page 1 of 1
Gen meter err 60
Posted: Fri May 01, 2015 8:22 pm
by nepytune
faulty machine displaying gen meter err 60, anyone else had this problem and how did you resolve it? I have a bell fruit pharaohs gold machine.
Posted: Sat May 02, 2015 10:05 am
by buzzer
on the top right handside of the front door,(where the red circle is) there should be an electronic meter .
sometimes the plug gets snagged when opening and closing doors.
make sure its there and connected..
Posted: Sun May 03, 2015 11:59 pm
by nepytune
Hi thanks for the reply, I have checked the wires and it all seems ok, it actually started working today but then after a few minutes it said gen error again. I pulled off the small circuit board from the motherboard and left it out for 10 min. I put it bk in and it worked again for 10 minutes then error code came up again. Really annoying.
Posted: Mon May 04, 2015 12:04 pm
by buzzer
if thertes no obvious damage to the wires , then the next step would be to replace the meter..
Code: Select all
[url]http://www.ebay.co.uk/sch/i.html?_odkw=security+meter&_from=R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xfruit+machine+meter.TRS0&_nkw=fruit+machine+meter&_sacat=0[/url]
they occasionaly go faulty, very rare though...
Posted: Tue May 05, 2015 6:57 pm
by nepytune
there was an earth wire that was just hanging down and i've reconnected it where I think it goes, also it looks like another earth wire in the same area is damaged (crushed by the door I think). Thanks for the link, I've ordered the part now and just have to see if that solves it, cheers buzzer.