Page 1 of 1

stake key

Posted: Wed Oct 12, 2011 2:03 pm
by paul600rr
does a pyscho cash beast £250 jp need a stake key to change it from 30p to 10p play can you put it on 10p play and keep the £250 jackpot ???? is it easy to do this and were is the refill key position on these machines and will it be the same key as the door or coin box as i only got 2 keys with it any help be good thanks paul :? :

Posted: Thu Oct 13, 2011 10:40 pm
by stewy
I found this post a little confusing. I'm trying to understand it so I can help you.

Price of play is controlled by a stake / prize key. There's no option to run a m/c on a 10p stake with a 250 JP. (if there is, I stand corrected). However why would anybody want to do such a thing?

The position of the refil switch will depend on the cabinet the game is housed in but if it's a horizon it will be to the right of the payout tray on the m/c.

The key will be a standard refil key 87000 (unless it's a machine that requires an i button).

However the refil switch is not required to change either a S/P or % KEY.

Posted: Fri Oct 14, 2011 8:18 am
by paul600rr
sorry mate all i want to do is change my machine from 30p play to 10p play so was unsure if i can do this with out a key or if i need to buy one so if you can tell me how to put it on to 10p play that be good

Posted: Sat Oct 15, 2011 11:38 am
by reelman
No, you do not need a stake key on the £250 PCB, you just need to set the Dil switches accordingly. There is usually a sticker in the cabinet telling you how they need to be set up for each jackpot & stake.

Posted: Sat Oct 15, 2011 11:41 am
by reelman
Also, if you want it set on just 10p stake, you will NOT be able to have it set on a jackpot of £250, so you will need to adjust that too, or else the machine will alarm with invalid setting. I think the highest jackpot you can have with a 10p stake is £100. You will obviously need to swap over your decals too ~ if you have them.

Posted: Sun Oct 16, 2011 6:31 pm
by paul600rr
cheers can see 8 dil swicthes on bank 1 but dont have the instructions for the settings it says refer to manual so if any one has the seetings that be good help ???????????
reelman wrote:No, you do not need a stake key on the £250 PCB, you just need to set the Dil switches accordingly. There is usually a sticker in the cabinet telling you how they need to be set up for each jackpot & stake.

Posted: Sun Oct 16, 2011 6:55 pm
by reelman
There's another 8 switches on the othe bank, mounted in the extreme corner of the MPU5 ~ you may need to move a reel out of the way so that you can see it properly.

Posted: Mon Oct 17, 2011 8:03 pm
by paul600rr
thanks found the other bank sorted :lol:
reelman wrote:There's another 8 switches on the othe bank, mounted in the extreme corner of the MPU5 ~ you may need to move a reel out of the way so that you can see it properly.