Page 1 of 1
Disco inferno bellfruit help please needed
Posted: Sun Apr 04, 2010 6:58 pm
by Radstockben
Have a disco inferno always worked fine now won't switch on light comes on on transformer but nothing else checked fuse and not that can anyone please help
Posted: Sun Aug 22, 2010 9:03 pm
by kevf1888
Hello
Did you ever sort this problem, as I now have the same problem
Thanks
Posted: Sun Aug 22, 2010 11:10 pm
by ben twilly
have you tried pressing the "reset"/"test" button on the board when its turned on??
Posted: Thu Sep 02, 2010 4:58 pm
by kevf1888
Which one is the test/reset button?
Posted: Thu Sep 02, 2010 5:55 pm
by mark
ive had same problem light on transformer but machine still dead..turned out to be a faulty transformer..buy a new one if all fails i did it solved that problem..
Posted: Wed Sep 15, 2010 4:55 pm
by arcadeclearanceltd
Are you sure that the program card is still plugged into the main board? If this has come out then it gives th impression that the machine is dead
Cheers Darren
http://www.fruitmachineworld.com
Posted: Mon Sep 20, 2010 5:23 pm
by kevf1888
Mine now says
Reel 4 Error 24
Any ideas?
Posted: Tue Sep 21, 2010 3:46 pm
by arcadeclearanceltd
Is it a club?
Posted: Tue Sep 21, 2010 6:20 pm
by kevf1888
a club?
Sorry not sure what you mean
Posted: Tue Sep 21, 2010 8:22 pm
by arcadeclearanceltd
Sorry, is it a club machine ( 4 reels - high jackpot ) or a pub machine ( 3 reels - low jackpot) ?
Posted: Tue Sep 21, 2010 8:50 pm
by kevf1888
Sorry I get you now
Its a 3 reel £25.00 jackpot machine
Posted: Tue Sep 21, 2010 8:53 pm
by arcadeclearanceltd
So reel 4 will be the top reel. Check if anything is touching the reel, wires etc.
You may find that the metal box that covers the scorp 4 board and program card is just touching the reel and stopping it from spinning.
Cheers
Darren
http://www.fruitmachineworld.com
Posted: Tue Sep 21, 2010 9:38 pm
by kevf1888
Cheers I will check tomorrow to see what I find
Posted: Fri Sep 24, 2010 2:59 pm
by kevf1888
It seem do do something different everytime I look at it
Today there is no error reading on the display, ive reset it but nothing happens
There are 4 green lights on the main board and a red light on each reel
Posted: Fri Sep 24, 2010 3:05 pm
by arcadeclearanceltd
It could be a power supply fault. You could do with another power supply to test in the machine just to eliminate that idea.
Cheers
Darren
http://www.fruitmachineworld.com