Page 1 of 1
monster cash errors
Posted: Tue Dec 01, 2009 7:00 pm
by russkill
HI all, I've just changed the motherboard battery and it now doesn't recognise anything! I know how to do notey but what about coin mech hopper etc... Any help appriciated. Russ
Posted: Tue Dec 01, 2009 7:27 pm
by starleisure
Epoch or onestop?
Posted: Tue Dec 01, 2009 7:32 pm
by russkill
it's a global games machine with eclipse on motherboard, when i switch on it comes up with 4.2 mem error even though i have changed battery it then has ?????? against all components?
Posted: Tue Dec 01, 2009 7:38 pm
by starleisure
Ok last time i had this issue i needed to change the hopper and mech to get the machine to register the new items.
Onestop tech is rubbish and the 4.2 issue happens all the time, i have never changed the batts as i find if there sited and the pubs open for 12 per day with at worst a 12 closed time the machine will not error.
Not the fix your after i know but just every single onestop mpu i have does this ( over 25 ).
Im guessing you cant change the mack or hopper as you only have one machine at home, hence unsure of how to advise you really without spending money.
Posted: Tue Dec 01, 2009 7:41 pm
by russkill
OUCH! Thanks anyway, anyone else with any suggestions???
Posted: Tue Dec 01, 2009 7:42 pm
by starleisure
No probs, im sure aaa will be here soon to add a thought or two.
Posted: Tue Dec 01, 2009 8:15 pm
by russkill
Right then, done a ram reset and now when switch on get 01 pay error?
Posted: Wed Dec 02, 2009 2:02 pm
by aaamusements.co.uk
Not had a huge number of problems with Eclipse, but I know they can be a complete pain...
These use flash memory instead of roms, don't they?
Posted: Wed Dec 02, 2009 2:45 pm
by 6502
Have you got the cctalk loom plugged into the right socket (the bottom one)
as the socket above is for mars looms only and the cctalk loom will fit.
those ???? your seeing mean the system can't see them either.
Posted: Wed Dec 02, 2009 3:54 pm
by russkill
everything was working ok, but kept getting mem reset. was told to change battery, so did, worked fine for 3 weeks then got mem reset again, then ??????? on all so did ram reset, now getting 01 pay error, it is flash yes aaa.
Posted: Wed Dec 02, 2009 10:19 pm
by 6502
Unplug everything on the cctalk line, mech, hopper, notey.
then plug one in an boot up - ie coin mech, and note the messagess on boot.
If one device has gone tit's up it will drag everything else down - trial and error.
Have had a dud notey take out everthing else and visa versa.
Posted: Fri Dec 04, 2009 2:13 pm
by russkill
Hurray! Thanks for the help people, elimination worked, notey causing problem, took out and reset with switch 6, still getting mem reset daily though even with new battery, what next?
Thanks again.