Page 1 of 1
barcrest phil the power taylorcoin control prob
Posted: Wed Nov 04, 2009 10:44 pm
by borgred
hi hope someone can help,when i do a refil on the machine the pound coins go straight through to the bottom bins instead of the hopper evan in normal play. i have duped it and started again no change. help
please
Posted: Wed Nov 04, 2009 11:48 pm
by reelman
Assume you mean "dumped" and not "duped" ?
How many £1 coins were dumped ? Could it be that the hopper is actually full, hence why they are diverting to the buckets below ?
Posted: Thu Nov 05, 2009 12:04 am
by borgred
hi no the hopper thinks its empty, only got the machine today, but i have 5 so i know how to dump and refill ,its mashing my head never encounted,this problem before. hope you got more ideas than me.
Posted: Thu Nov 05, 2009 6:15 am
by reelman
Missing, poorly fitting, or even the wrong routing plug fitted to the coin mech ?
Posted: Thu Nov 05, 2009 8:10 am
by borgred
hi yes the routing plug is missing ,do you know where i could get one or is that a big prob cheers.
Posted: Sat Nov 07, 2009 9:45 am
by hannibal
Look on the wiring harness next to the coin mech...as the routing plugs are normaly fitted over the harness so they dont get lost. Your machine should have 2 ruting plugs 1 marked MARS and the other marked COIN CONTROLS look at th make of your coin mech and use the plug with the same name on it.....hope this helps
Posted: Sun Nov 08, 2009 10:55 pm
by borgred
hi well its a sr5 coin mech and i have been told that they dont use the routing plug on this bandit and i need a new coin mech would u know if this is correct, this info came from gemini games
:
Posted: Sun Nov 08, 2009 11:47 pm
by reelman
Are you not able to swap the mech with a known good one from your other 5 machiones to test this theory?
Your other machines are probably fitted with a cashflow mech, which is far superior in my opinion and the most commonly fitted, for good reason.
Is there another plug on your loom to enable the fittment of the Mars mech ?
Just a very quick thought, could this routing plug, assuming it's supposed to have one, have fallen out and dropped to the bottom of the cabinet in transit or something ?
Posted: Mon Nov 09, 2009 9:36 am
by borgred
HI I WILL TRY ANOTHER MECH AND LET YOU KNOW THANKS
Posted: Mon Nov 09, 2009 9:49 am
by borgred
HI IT STATES IN SIDE THE MACHINE MARS COIN MECHS CANNOT BO USED ON THIS MACHINE NICE ONE
Posted: Tue Nov 10, 2009 4:44 pm
by borgred
hi false info of tech on phone i tried a old routing plug and now its fine,thanks for all your help
Posted: Tue Nov 10, 2009 6:52 pm
by reelman
It is nice when people make the time to respond and let you know that your advice has helped them to sort out their machine ~ thanks. It makes it all worth while.
Bearing in mind that this router you've used may be wired slightly differently to how it should be, I would check that it not only diverts the £1 coins away from the hopper and to the coin boxes, once the hopper is full, as well as diverting them to the hopper when it is not full.
It doesn't really matter if all of the other coins go in the left box instead of the right, or vice versa, so long as none of them get diverted into the hopper and jam it up.
Looks like you're sorted though.
Have fun
Posted: Tue Nov 10, 2009 7:13 pm
by borgred
hi cheers ive checked and lucky for me its spot on happy days
Posted: Tue Nov 10, 2009 10:50 pm
by aaamusements.co.uk
borgred wrote:hi cheers ive checked and lucky for me its spot on happy days
That was damn lucky if it was just a random routing plug!
Good stuff.
Posted: Tue Nov 10, 2009 11:10 pm
by borgred
yeh it was when the one i found had been in the loft of a old barcrest machine from 2001 thats lucky