Got a broken machine? Need help? Ask here!
nipa1970
Junior Member
Posts: 4 Joined: Tue Nov 25, 2014 8:51 pm
Post
by nipa1970 » Tue Nov 25, 2014 8:58 pm
hi i have just acquired spiker the biker machine and was wondering is it possible to reprogram the slot for the new 10 pence piece thanks in advance
duomat
Senior Member
Posts: 208 Joined: Mon Apr 20, 2009 9:13 am
Location: nottinghamshire
Post
by duomat » Tue Nov 25, 2014 11:34 pm
I think that is quite an old machine,by old i guess about 8 years.I would say not,i may be wrong but these new 10ps are not accepted by vending machines of only 12 months old
Spyder
Senior Member
Posts: 3130 Joined: Sat Apr 30, 2005 2:42 pm
Post
by Spyder » Wed Nov 26, 2014 11:30 am
Spiker the biker was made in 2000!!
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Wed Nov 26, 2014 3:11 pm
its simple a matter of updating with newer correctly configured coinmech.
a new mei cashflow mech or sr5i or sr5e could be configured to work properly in it..
nipa1970
Junior Member
Posts: 4 Joined: Tue Nov 25, 2014 8:51 pm
Post
by nipa1970 » Thu Nov 27, 2014 7:05 pm
thanks for your reply chaps so where could i get one or point me in the right direction to purchase thanks
dog section
Senior Member
Posts: 237 Joined: Fri Nov 15, 2013 11:23 pm
Location: all over england
Post
by dog section » Thu Nov 27, 2014 11:07 pm
on ebay theres a few new mechs that state theyre updated, or you can send yours away to be upgraded and returned. couple firms were advertising this service on there
k9-sec.co.uk
nipa1970
Junior Member
Posts: 4 Joined: Tue Nov 25, 2014 8:51 pm
Post
by nipa1970 » Sun Nov 30, 2014 9:51 am
ok im total noobie what coin mech would be in mine barcrest spiker the biker cheers
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Sun Nov 30, 2014 1:40 pm
could be a couple of diffrent mechs, post a picture of it...
MrOsborne
Junior Member
Posts: 17 Joined: Tue Jan 27, 2015 3:26 pm
Location: Thanet
Contact:
Post
by MrOsborne » Tue Jan 27, 2015 5:40 pm
I have the same issue, but most coin mechs don't like the new shiny 10p's