Reseting Float

Peanut · Post by **Peanut** » Sun Mar 30, 2014 3:26 pm

Hope I explain this correct.

When I check my hopper levels it will tell me what I have in my hopper for example if I have 167 pound in the hopper it says there in 167

How ever if there is 56 pound in the float it says there is 250 in there and constantly says this no matter what.

Can this be reset?

It is mpu6 machine I am using

buzzer · Post by **buzzer** » Mon Mar 31, 2014 4:04 pm

dump the hopper , the machine will now be empty.

dump the hopper again, the machine update the float so that the new float level is zero.

u can then fill the hopper via the refil key and machine should display the correct float level.

Peanut · Post by **Peanut** » Tue Apr 08, 2014 10:52 pm

buzzer wrote:dump the hopper , the machine will now be empty.

dump the hopper again, the machine update the float so that the new float level is zero.

u can then fill the hopper via the refil key and machine should display the correct float level.

Cheers I'd got sorted was confussing my self before hand