Sticking Buttons
Sticking Buttons
Hi
Just managed to get hold of Red Gaming Crazy Cash Point.
Some (most) of the buttons are sticking a bit. What's the best way to stop them sticking?
Thanks
Just managed to get hold of Red Gaming Crazy Cash Point.
Some (most) of the buttons are sticking a bit. What's the best way to stop them sticking?
Thanks
-
- Senior Member
- Posts: 1159
- Joined: Thu Sep 17, 2009 6:04 pm
- Location: Today, Hull. Tomorrow...Still Hull...
I had to take the entire button out and take it apart from the springs and microchips. Not easy reassembling. The stickiness is normally between the spring and the button, so the inner surface normally needs cleaning. I took the button out , removed the spring and gave the plastic part a good rinsing and soaping in the sink. Put it back together and it worked fine! I had a Red Lucky Devil so same cabinet and button shape.
If you need help just ask, I might be able to assist with what I can remember however my machine isnt with me at the moment lol
If you need help just ask, I might be able to assist with what I can remember however my machine isnt with me at the moment lol
that's the proper way of doing it, any thing else is a short term bodge.Captain.Tattybojangles wrote:I had to take the entire button out and take it apart from the springs and microchips. Not easy reassembling. The stickiness is normally between the spring and the button, so the inner surface normally needs cleaning. I took the button out , removed the spring and gave the plastic part a good rinsing and soaping in the sink. Put it back together and it worked fine! I had a Red Lucky Devil so same cabinet and button shape.
If you need help just ask, I might be able to assist with what I can remember however my machine isnt with me at the moment lol
remove the button inner and outer from machine then pop off the button 'lens' and wash every thing as above.
yep, as he says, remove completely, it's an easy job.
Remove switch by twisting, then unscrew the plastic retaining ring and remove button from glass.
use a foam cleaner (or any other cleaner really)
then repeat above in reverse. It's a half hour job but worth doing properlt. Many m/c's have had a build up of spilt drinks, dust and other crap, especially if you have picked up a 2nd hand one...
Remove switch by twisting, then unscrew the plastic retaining ring and remove button from glass.
use a foam cleaner (or any other cleaner really)
then repeat above in reverse. It's a half hour job but worth doing properlt. Many m/c's have had a build up of spilt drinks, dust and other crap, especially if you have picked up a 2nd hand one...