Global Wild Side Error HELP PLEASE
-
- Junior Member
- Posts: 5
- Joined: Fri May 14, 2010 6:04 pm
Global Wild Side Error HELP PLEASE
Hi guys, I have a fault with my Global - Wild Side Fruit Machine. When I turn it on the reels move round a little and the speaker makes its usual wine noise but nothing starts up. Next to the coin slot is a little screen wich sais 'FAIL SEC 02E'? Please Help me.... : [/b]
-
- Junior Member
- Posts: 5
- Joined: Fri May 14, 2010 6:04 pm
p.s
im really not all that savy with all his so please excuse me
-
- Junior Member
- Posts: 5
- Joined: Fri May 14, 2010 6:04 pm
The little black box with the screen on is a serial meter.
If it is showing something on it it means it is plugged in at least to get power, its not totally impossible that one of the data wires has broken but I dont think this would be your issue.
The machine has a better chance of booting with the door open as less checks are done. If when you boot it door open it fails to bootup and there are no error messages on the alpha the problem almost certainly lies with the main board somewhere, either software or hardware. Either that or the alpha is also not working and so you cant see the error.
Did it used to work and has now stopped?
Is it eclipse or epoch hardware? (can you see proms on the main board or is it encased in a flat black metal box)
Have you seen the alpha working, and sure this is plugged in?
If it is showing something on it it means it is plugged in at least to get power, its not totally impossible that one of the data wires has broken but I dont think this would be your issue.
The machine has a better chance of booting with the door open as less checks are done. If when you boot it door open it fails to bootup and there are no error messages on the alpha the problem almost certainly lies with the main board somewhere, either software or hardware. Either that or the alpha is also not working and so you cant see the error.
Did it used to work and has now stopped?
Is it eclipse or epoch hardware? (can you see proms on the main board or is it encased in a flat black metal box)
Have you seen the alpha working, and sure this is plugged in?