i have a global machine called A KNIGHTS TRAIL and i have a slight fault.
the fault is the speaker has a buzzing interferance comein out of it and i dont no wot it is doin my head in.
anyone with an answer would be a very great help.
many thanks david
need help with a fault please anyone
-
trayhop123
- Senior Member
- Posts: 4901
- Joined: Tue Jan 22, 2008 9:21 pm
- Location: leicester
im far from a technician ,
but 9 times out of 10 this is normally not a technical fault anyhow , and can be found in any appliance that has a speaker .
VIBRATION
have you recently moved this machine from its usual location ?
check there isn't now a lose screw , in any part of the machine , even a small chip/stone etc , anywhere , in and around the payout tray ,,,,,,,, overflow trays ,,,,,, anywhere etc
anything that has the potential to vibrate ,,,,,,,,,,,, the speaker will pick up on it.
even try lifting the machine , and or adjusting its position etc.
but 9 times out of 10 this is normally not a technical fault anyhow , and can be found in any appliance that has a speaker .
VIBRATION
have you recently moved this machine from its usual location ?
check there isn't now a lose screw , in any part of the machine , even a small chip/stone etc , anywhere , in and around the payout tray ,,,,,,,, overflow trays ,,,,,, anywhere etc
anything that has the potential to vibrate ,,,,,,,,,,,, the speaker will pick up on it.
even try lifting the machine , and or adjusting its position etc.
Little discipline = BIG issue
**** ****
**** ****