Page 1 of 1
Coin Mech
Posted: Mon Feb 01, 2016 7:57 pm
by Dazzer 150
Hi
what is the difference between the SR5 and the SR5I ? and can you use them on a machine where a C453A is used (astra machine)
Thanks
Posted: Mon Feb 01, 2016 8:41 pm
by buzzer
SR5i is more secure but will work in machine exactly the same as SR5.
you could use it in place of a c453a mech as long as its configured properly. ie set to parallel mode and mech routing
Posted: Mon Feb 01, 2016 8:57 pm
by Dazzer 150
Thanks
Posted: Mon Feb 01, 2016 8:58 pm
by Dazzer 150
where and how do you make the changers to get the SR5 working instead of the C435A?
Thanks
Posted: Mon Feb 01, 2016 9:39 pm
by buzzer
On the back there is a rotary switch and a bank of 2 switches.
tha mech can be set to parallel, seriel or c-c talk mode and the routing can be changed from eeprom routing or routing mode using thses switches.
i can't remember the exact process, you might want to read a tech manual for the mech..
http://www.gmmpro.ru/pub/SR5_Technical_Manual.pdf