Italian Job 1

PeterFenton · Post by **PeterFenton** » Fri Jun 08, 2012 10:48 am

Hi,

Got an Italian Job 1 which will work for a bit and then switches off.

It will then work again if you leave it five or ten mins and then switch off again.

The backup battery was well shot and has now been taken off the board, some leakage but not sure if it has damaged the board.

Any ideas.

I can give you the led sequence if that helps but it does flick quite quickly from lights to lights and also makes a nosie from down near the coin box.

Thanks

PeterFenton · Post by **PeterFenton** » Fri Jun 08, 2012 5:13 pm

I think I've just had that replaced.

Will Check .

sharkie777 · Post by **sharkie777** » Mon Jun 11, 2012 8:53 am

Sounds like boards fucked but make sure where the cr cell battery is that the terms are clean and not corroded.