General fruit machine related chat, if it doesn't fit another category discuss it here..
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Mon May 19, 2014 8:09 pm
hi everyone, i have a Barcrest Fun In The Sun fruit machine. was working fine... went in the bath then came back and it had froze! so turned it off then tried turning it back on but nothing.... i have the 4 green lights on the mpu5 and the green lights on the other boards, also the little counter above the coin slot is on but will not work! no lights no wheels spinning nothing. can anyone please help me with what could cause this please, i would be very grateful! thanks nick.
Ruler of The World
Senior Member
Posts: 2110 Joined: Thu Jul 26, 2012 12:51 pm
Post
by Ruler of The World » Tue May 20, 2014 1:33 pm
If it froze you probably need to turn on your central heating.
JG edit: grrrr that's the sort of thing I'd post and then you'd berate me for posting it!
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Tue May 20, 2014 1:50 pm
haha thanks for the tip!
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Wed May 21, 2014 8:15 pm
anyone got any real help!? could this be the program card or mpu5?
Ruler of The World
Senior Member
Posts: 2110 Joined: Thu Jul 26, 2012 12:51 pm
Post
by Ruler of The World » Wed May 21, 2014 8:59 pm
I would help if I could mate. All I know is you used to be able to empty them but forgot how! Something to do with nudge gambles I think! Filling in some fruit pot or something?!
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Wed May 21, 2014 9:31 pm
not a clue what you just said!
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Wed May 21, 2014 9:36 pm
The attachment IMG_0929.jpg is no longer available
Attachments
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Wed May 21, 2014 9:37 pm
The attachment IMG_0926.jpg is no longer available
Attachments
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Thu May 22, 2014 4:18 pm
if the green led next to the red led is not flashing, then the mpu5 is not running.
this is the status led, it has the ability to flash red and green and does so to convey error codes when the mpu5 is unable to start properly.
switch it off and on and watch that led, if it flashes at all, count them and post what u get.
for instance, 3 green 1 red or 4 green 2 red etc etc...
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Sun May 25, 2014 9:37 pm
the status light or the red led does not flash at all. all i have is the 4 green power lights.
buzzer
Senior Member
Posts: 592 Joined: Sun Apr 28, 2013 9:58 am
Post
by buzzer » Mon May 26, 2014 10:20 am
then either the mpu5 , gamecard or proms are fooked...
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Mon May 26, 2014 11:50 am
ok, i have ordered an new mpu5 and gamecard already. whats the proms?
eddiesdad
Member
Posts: 78 Joined: Sun Jul 08, 2012 9:03 pm
Location: the pub
Post
by eddiesdad » Mon May 26, 2014 6:28 pm
proms are the large chips on the gamecard.the gamecard also needs to be programmed with the specific game otherwise it is useless
nicko1993
Junior Member
Posts: 14 Joined: Mon May 19, 2014 8:02 pm
Location: leicester
Post
by nicko1993 » Mon May 26, 2014 7:03 pm
how do i program my new gamecard?