Fruit Machine Chat

Have you located the Dil switches?

Buzzer is spot on with his preliminary diagnosis, given the information that you've provided.

As Marty says, it may be giving a 40p bonus, abd if your LED was working, it would probably tell you on this that you had been given a bonus. Usually, there's a script on the glasswork, telling you that all wins will be rounded up to the nearest pound. Finally, you never said if this was a hopper pa...

Try cleaning it for a start

It's nothing to do with whether or not there's sufficient coins in the hopper. Think about it ~ what happens in your local arcade when the level drops i.e someone has recently had a big win, or a string of smaller wins? Answer ~ the note accepor turns off, and is simply not available. It certainly d...

A aluminium box on the back wall. Remove that, and you'll see the board in all its glory. However, there is a smaller plate located on this box itself, which can be removed easily. It's about 3 inches x 2 inches, and can be removed just by using a 10p coin to twist the securing lug (no special tools...

Stupid question indeed !!! Of course if the machine tries to pay out £3 and the hopper is empty, then nothing will come out, and it will alarm. As suggested previously by MartinB, put some money in the hopper, but make sure you only put £1 coins in. I would suggest that you place at least £50 in, to...

Do you mean without having to open either the top or bottom doors?

Yes, it can, but you will need to fit the seperator from the ME129 onto the 126 as well. Was your existing mech ever upgraded to take £2 coins, if so, you will need to check that the 126 has also had a similar upgrade ~ usually a big green or orange box tagged onto the side, which fools the mech int...

Sorry for delay in responding, but easiest place is probably flea bay, although you can also request parts on here, and I'm sure you'll be offered what you need fairly quickly. As for the coin mech, simply get the same as what you've already gor, whether it be a cashflow 126 or something else, as th...

If you're getting exactly the same error message, i.e. 2.1 and 2.3, and presuming you haven'y swapped reel 1 with reel 3 to test them, then you've effectively proved that there is no fault with the reels. The most likely cause is now the reel driver board. Unfortunately, the only way to test it, is ...

On the information you have given thus far, my initial diagnosis remains unchanged. The most likely cause of your problem is that the electical pulse required to operate the solenoids, is not reaching all of them. Most likely reason for this is metal fatigue of the connectors that sit on the solenoi...

Very unlikely that the battery is anything to do with 1 or 2 tubes not working, when the others are, especially when the meters are being pulsed. I suspect someone is trying to sell you a battery. Do you have a manual, as this will tell you how to put this particular machine into test mode, which wi...

Bloody hell, an old tubed machine. Very easy to fix ~ but need to identify which of a few possible problems your machine has. Here's a few ideas to get you going 1. The electrical pulse is not getting to the solenoid. What happens is that after years of vibration, the electrical connector on the sol...

You are no doubt looking at a "naked" NV10, without the mounting bezel. It is the mounting bezel that fits to the glass, and then the NV10 fits to it. Not sure what you mean by the hopper is not taking coins ~ you presumably mean the coin mech is either not taking coins, or perhaps not rou...