Fruit Machine Chat

hi these daft numbers are a corruption in the program----get a new one----should not have to keep ram clearing m/c

lol----------- so you were right after all -clever .g....t-lol

are all your door switches connected?

yeah mate have own p/s we had to get new one on warenty---must have sent a bad batch out astra

brick-----breeze block 2 diff things on a mech lol

sorter? lol seperater

switch bank 1-8 1.clear credits ony any reset(anti fraud) Off=yes On=no(3resets) 2-6 not used 7.payout bank after win Off=no On=yes 8 not used switches 9-16 9,10 not used 11.Bank limit Off=high On=low 12.Credit limit Off=£10 On=£5 13.not used 14.Free credit (demo) Off=inhibit On=enable 15.Extended r...

ops:

may i just add that s16 does not exsist anymore----now called b3---thanx----------------- any way is the black marks on io3 board or on the piggy back part

try a full ram clear usually sorts the probs out----

also there is usually 2 fuses near the mux pcb sometimes one of the fuses blow change this should be ok after that

mux board is the board contolling the lights mate--

you can remove bat but every time you switch machine on it will start from beginning of program eg it will pay out loads

hi the tech is pluto 6------ need to have bottom door open to access test mode---when the menu--show meters is on then press test---it actually says-------- entering test mode

test button is located in line with your head on a metal bar which runs from side to side--there should be 2 buttons here---one is hopper refloat