Fruit Machine Chat

Bought a new stadium psu..69.99 all works fine now..thankyou for the help buzzer

44/48v stays between 44.4 and 44.5 so all good there ??

Right...so i stuck the multimeter in the back while powered on...positive to number 2 on the 9 pin bank...reading 5.22....so my 5 volt is ok??

Update....44/48v pins 8+9 on the 9pin bank..both read 44.4...is this right? Starting to think my mpu has taken a dump on me

Not sure im confident enough to do that..i will have a look though!! If i remove the battery..would i be able to turn the voltage back up so all lights are fully working or will it still crash when lose?

Ok so sorted the 'left to pay 38.00' out..all running sweet except lights all dimmed...i have noticed a little colour defect next to the battery..r54 or something is also a little green..im no good with a solder iron so im guessin new mpu now? And thanks buzzer for your replies

I will have it looked at..i have another issue now..my 8yr old pressed collect.(empty hopper)..its continually says left to pay 38.00..tried putting 8quid in hopper then reboot and nothing..still says same and no movement from the hopper? This machine boils my pi55

I looked inside the psu and theres a little switch with numbers 0-9 on...was set at 3..i adjusted it to 2...then boot the machine as normal..lights are alot dimmer(can still see them)but the machine plays perfect now..didnt crash once yesterday...any ideas how to fix or resolve it...new psu?? Thanks...

So..after a few hours its boots up..took the cover off the psu and disconnected the fan..plays perfect until i lose on a feature then initialises .doesnt always do this but 7/10times it does..psu fault maybe? Its a sanken sps077w i think

Are these forums still active??

Just bought bell fruit machine dond crazy chair...keeps initialising..sometimes works..then mainly initializes when game lost..now seems to be constantly initis..not sure where to start so hopefully someone here could help..thanks