Search found 22 matches

by Matt81
Tue Jan 07, 2014 12:23 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

buzzer wrote:in the cashbox?
No online. :-)
by Matt81
Sat Jan 04, 2014 2:30 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

Managed to find missing parts ;)
by Matt81
Thu Jan 02, 2014 10:54 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

buzzer wrote:one of all the holes, 5,10,20,50,£2 coins will fall through.

£1 coins will into hopper until it full then fall down the other hole
Cheers mate.


Anyone know where I can get a manual from? Would be nice to know how it all works now it's up and running.
by Matt81
Thu Jan 02, 2014 4:56 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

Double post.
by Matt81
Thu Jan 02, 2014 4:39 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

oh they will, but the holes are close together, can u not see two holes next to the hopper that lead to the cashbox? Yeah I can see the holes. I assume Pounds should go back to the hopper while other accepted coins should drop into these? 9 times out of 10 coins are dropping into the correct space ...
by Matt81
Thu Jan 02, 2014 1:26 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

Cheers, part ordered - as long as the coins come out of different holes I'm sure we can knock something up! At the moment they are coming out the same whole (just slightly different angles).
by Matt81
Thu Jan 02, 2014 1:05 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

lol, you are missing a seperator, which connects to your mech.. looks like this.. http://www.swallowam.co.uk/parts/pimage/cn0021.jpg connect to the mech by a plug and two screws so yer mech looks like this http://www.servicesystem.co.uk/wp-content/uploads/2011/04/9500.jpg this is the one you want. ...
by Matt81
Thu Jan 02, 2014 10:22 am
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

nice 1, cardboard chutes are fine as long as it works :) just dont let anyone use 50p lol ps have a look down the bottom of the machine, the missing chute might be lying around in there I'm back home now but will tell my dad to have a look for any loose pieces. I took some pics of the mech and hopp...
by Matt81
Wed Jan 01, 2014 10:41 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

maybe a bit of the plumbing missing, can post a short vid or a couple of photo's of the inside of the machine? Correct again sir! Looks like something is missing. For now I have made a cardboard chute that allows any rejected coins to come out the coin tray. Only issue I have now is that sometimes ...
by Matt81
Wed Jan 01, 2014 5:12 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

ok, the mech you have is whats known as a "multi-protocol " mech, this means it can operate in diffrent modes, (c-c talk, parallel etc). if you look on the front of the mech, close to the led and where it plugs into the machine you will see a bank of eight switches. [ATTACH=CONFIG]1635[/A...
by Matt81
Wed Jan 01, 2014 1:54 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

Mech manual shows 4 flashes means coin inhibited by host machine. How to I make the machine allow it?

Thanks again for help.
by Matt81
Wed Jan 01, 2014 1:40 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

lee wrote:The coin mech will be on cctalk,with no routing plug ,and if you open the gate it will show a red light because it doesn't sense the coils in the mech and thar is telling you it is an error
Sorry I don't understand.

If I put a coin in with door switch closed the red led flashes 4 times.
by Matt81
Tue Dec 31, 2013 8:25 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

buzzer wrote:hold the door swiches closed, insert a coin and watch the green led.

then post what it does

also how many connectors between the mech and the machine?
1 connection. Will post results tomorrow.
by Matt81
Tue Dec 31, 2013 6:07 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

Noticed if lid open coin mech will flash red on coin insert.
by Matt81
Tue Dec 31, 2013 5:54 pm
Forum: Technical Area
Topic: JPM Fantaztec
Replies: 41
Views: 5229

Ok volume up all working except coin mech it is a cash flow 9524.

It was sent for fixing and looks to be clean. Green light is on.

Don't know why coins not registering.